This set includes 3, 2.5" wide x 1.5" high Brand Savage Logo Transfers. One Full Color, One Black and One White transfer, plus an installation kit including an application squeegee, 3 surface prep wipes and application instructions.
Brand your favorite Drinkware, Laptop, Cell Phone Case or any other suitable surface with these High Quality Permanent DTF UV transfers. Easily apply these transfer to many surfaces with the provided application kit and and instructions. These transfers are permanent, scratch resistant and durable* making them a quality way to add your favorite band to your favorite items.
*DTF UV Transfers are made with high quality UV inks and proven permanent adhesive for a strong durable bond to many surfaces. Items decorated with DTF UV transfers are recommended for hand washing only to protect and preserve the life and quality of the image.
Application Instructions:
1 - Prep Your Surface and Pre-Squeegee Your DTF UV Transfer Prepping the Area - Always, clean the surface of your item before applying the DTF UV Transfer using either soap & water, all purpose cleaner, a mixture of rubbing alcohol and water (50/50 mix), or the provided Surface Prep Wipes.
Pre-Squeegee - Before applying, place your design face down with the white ink side facing up. Using the padded end of the squeegee, run over the whole design with firm pressure, back and forth 2-4 times to push the DTF UV Transfer onto the top carrier sheet.
2 - Preparing your DTF UV Transfer for Transfer
Gently peel the two sheets apart, watching to ensure the whole design lifts off onto the top carrier sheet. Designs which contain thin lines and small separated elements, such as small text, the slower you should. If parts don't lift, re-squeegee from behind, and attempt to peel again from a different angle.
3 - Placing your DTF UV Transfer onto Your Item
First, identify the placement area on your item.
For smaller designs (5 inches & under), carefully place the design onto the placement area with two hands controlling the placement.
For larger designs (6 inches & larger), you may find it easier to place the sticker starting from one side and ending at the other. This will help control your placement, reduce bubbles underneath the design, and avoid wrinkling of the top carrier sheet which could cause design elements to be offset and/or design overlapping.
Tip: Leave a corner of the top carrier sheet unpressed to the product for easy peeling.
4 - Completing the Transfer Process
After placing the design, firmly press with your fingers and squeegee it 2-4 times. Peel slowly, watching to ensure all elements stick. If any part of the design is not adhering, lay the top carrier sheet back down, re-squeegee and try peeling from a different angle.
